Video camera SPD/Coaxial BNC K/J Surge Protection

1.Single port video SPD 2.Apply to monitor system 3.insert loss low 4.20 years` experience

NKP video SPD/ CCTV Surge Arrester

Product description

NKP-TEL-4C is applied to video surveillance systems, matrix BNC connector, Optical BNC interface, the camera BNC interface lightning surge protection. It can effectively prevent overvoltage and current which are induced by lightning or industrial noise and other factors, and other transient surge voltage on the system or equipment or cause permanent damage or momentarily interruption and other hazards.

1,It is suitable for single-channel video BNC interface lightning surge protection.2, Core components are selected international brands, they have high reliability, multi-level protection, low residual voltage.

3, It is designed with advantage of low-capacity, excellent transmission performance, large intake capacity, fast  response time and long lifetime.

4,Apply to monitor system, (such as video matrix switchers, cameras, video surveillance equipment, video distributor, etc.) video line surge protection.

  

Technical parameters

Model and specification	NKP-TEL-4C
The typical model applies	monitor system
Operation voltage	5V
Max. continuous operating voltage Uc	8V
Normal discharging current (8/20 us) In(kA)	5
Max. discharging current(8/20 us) Imax (kA)	10
Voltage protection level Up	≤18V
Response time(ns)	10-12s
Insertion loss	≤0.2 dB
Maximum transmission rate	20MHz
Protect the port quantity	75Ω
I/O interface	BNC-75Ω
Protected Core:	Coaxial type
Ambient temperature	-40°Cto 80°C
Outer covering material	Aluminum Alloy
Protection grade	IP20
Dimension(mm)	98x25x25
Test grade	GB/T 18802.21-2002

 

Product installation

1, The signal surge protective device is installed between Video signal channel and the protected device, the output termination is connected with the protected equipment.

2, All wirings must be solid and connected by electric.

3, Lightningproof grounding should be consistent with lightning protection regulatory requirements, ground wire should be thick and short as possible, resistance should be less than 10Ω.The grounding line: BVR ≥2.5 mm2 .

Video camera SPD/Coaxial BNC K/J Surge Protection